AGX-V
Universal testing machine with revolutionary technology
| Test force | 10, 20/50, 100, 300, 600 kN |
| Test type | Tensile, bending & compression tests |
| Drive | Electrical mechanical |
| Type | Table-top and floor-standing appliances |
| Industries | Universal |
Test results at the highest level
At Shimadzu, our goal is to develop equipment that delivers the highest level of test results. To this end, we have developed the AGX-V2, the highest class of testing machine in the industry. It features a high-strength frame, multiple processors, high-speed scanning and high-precision automatic control, an intelligent crosshead, stroke limit switches, a high level of safety, a controller with an advanced user interface, and software that supports the creation of test conditions and data processing with intuitive operability.
Revolutionary Technology Provides Full Control
Equipped with Multi Processors and Multi Engines, Providing Ultrafast Data Acquisition and High Response Control
Shimadzu’s proprietary control box is equipped with two processors and three engine units. It provides 1 kHz high response crosshead control and 10 kHz high-speed data sampling through high-level simultaneous parallel processing, based on a meticulous timing design, and the allotment of various communications, measurement, and control functions across multiple devices.
Leave Strain Rate Control to the Machine by Utilizing New Autotuning
High-accuracy control is maintained under noisy, highly disturbed conditions, something that was hard to provide with conventional autotuning.
This high-level autotuning is achieved by using not only feedback measurement values but all measurement values in the calculations for real-time updates of the control model.
Steel and Nonferrous Metal Testing
Strain rate control, in which the rate of deformation measured by an extensometer is controlled to be constant, requires highly accurate control to follow rapid changes in material behavior. Metal Tensile Test Standard: ISO 6892(JIS Z 2241) specifies that the allowable range of increase in strain to the yield point is ± 20% or less. The strain rate control specified in ISO 6892(JIS Z 2241) is possible*1 to achieve with the AGX-V2 for many materials.
Practical Simulation Testing
To maintain engine mounts and other rubber materials at a constant test force, it is necessary to gradually
change the retention position to suit the characteristics of the test sample. In order to maintain the test force at a constant value, high control stability is required, with high control responsiveness and no vibrations
generated due to excessive response.
Free Running Compression Testing
Stable control is achieved even in free running compression tests. In these tests, the compression indenter or bending punch is allowed to run free until it makes contact with the sample, at which point the load is increased up to a set test force. The overshoot of the target value is reduced, even in free running compression tests of highly rigid materials, resulting in high-accuracy test force retention.
Wider Range, More Detail, More Variety
Captures Instantaneous Changes
The ultra-high-speed sampling function has progressed up to a sampling rate of 10 kHz (0.1ms). Sudden and tiny changes, such as when brittle materials break, can now be assessed.
Reduces the Frequency of Load Cell Replacement
The guaranteed test force accuracy range has been enlarged to 1/2000 for an even wider range of data reliability. Even data from the very beginning of the test force application can be analyzed with confidence. Tests that previously required multiple load cell replacements to suit the test force are now supported by a single load cell, cutting back on replacement procedures and calibration expenses.
All the Data Are Synchronized and Acquired with High Accuracy A Data Logger is Not Required
The external input ports can be expanded to 20 channels. Analog input units and counter units can be selected, making it easy to acquire more data without a data logger. The load cell, extensometer, and external input ports are synchronized, and all channels are sampled simultaneously, improving the simultaneity of the data. This further improves the accuracy and reliability of the elastic modulus and other data calculated using two or more measurement values.
Load Frame
Testing Machine Main Unit
Frame Design Provides High Rigidity and High-Level Alignment
The newly designed guide column*1 is equipped with a support ring*1 that maintains a right angle with the table surface. As a result, measurement repeatability has been improved in tests of highly rigid materials and highly brittle materials, prone to the impact of frame rigidity or alignment, enabling stable testing.
XV-Talk™
Voice Operation Device
New Operability with Voice
The AGX-V2 responds to the operator’s voice.
The AGX-V2 operates in response to key phrases spoken by the operator. This frees the operator from frequently used buttons, such as “Start Test” and “Return.”*2*3
*1 Available floor models range from 20 kN to 300 kN.
*2 Use the voice operation function when the noise is 55 dB(A) or less. Voice operations may not work when the background noise is high.
*3 Without a safety cover, some voice control functions are limited.
True Safety for both the Operator and the Machine
Protects Operators from Debris
Highly transparent, impact-resistant polycarbonate safety covers are provided as standard for the front and rear of the test space. This prevents samples from flying out when they break. An interlock function is provided, so that if the safety cover is not closed, testing and the return operation are prevented, reducing the risk of accidents. Using optional accessories, all movement including the jog operation can be prohibited.
Intelligent Crosshead
Prevents Jig Impacts
The intelligent crosshead always recognizes its current position. If the jigs get too close due to an operational error, an impact warning is issued, and the crosshead is stopped automatically.
Contact Detection and Instantaneous Emergency Stop
The machine status is diligently monitored even when the crosshead is moved with the safety cover open, such as when adjusting the position of test jigs or attaching samples. If the machine detects the test force changes due to contact with jigs or hands, the crosshead performs an emergency stop.
Overload Detection Function
Stroke Limit Switch
inch, Position, and Release Grips
A stroke limit switch, which sets the limits of crosshead movement, prevents crosshead and jig impacts. A spring mechanism within the switch reliably sets the position when the hand is released, preventing configuration errors due to procedural mistakes such as insufficient tightening.
Self Check Function
Machine’s Self-Diagnostic Function
The function constantly monitors sensor amplifler calibration information, the operational status of the testing machine, the power supply voltage, and the communications status. The user is immediately notifled when a problem occurs. Additionally, the usage time and number of uses of the machine are checked, and a notification is issued when prescribed values are reached. This assists with the assessment of maintenance periods and helps reduce downtime. (It does not detect offsets in measurement values from load cells and extensometers due to age-related changes. Periodic maintenance and inspections by a field engineer are recommended.)
Operability that Takes the Shortest Path to Results
All Jigs are Easily Connected
The multi joint, which connects jigs to load cells, enables all jigs, including tensile, compression, and bending jigs, to be connected easily. The replacement of heavy joints is no longer needed, which simplifies the replacement of test jigs. A small-capacity load cell can be connected to the tip, so tests with small-capacity load cells can be performed with a large-capacity load cell attached as is.
Smart Controller
The controller is equipped with a touch-panel LCD, which displays the optimal buttons and information for the situation. It shows a variety of operations and informational displays, including jig space adjustments prior to testing and confirmation of measurement values during tests.
Selection of operation sound according to environment
The special AUTOGRAPH operational sounds are adjustable. Select from a pleasant sound quality enhancing operational comfort or a sound that is easy to hear even in noisy conditions. (The sound can also be turned OFF.)
Voice alerts
A voice message warns the operator before the crosshead moves, preventing mistakes by the operator. (The sound can also be turned OFF.)
Configure Optimal Grip Space
Automatically
With the intelligent crosshead function, the crosshead moves to ensure a user-defined jig separation. The jig separation is constantly monitored to prevent impacts between jigs. (The jigs must be pre-registered.) Additionally, the jig separation movement can be performed automatically in accordance with the test conditions by interlinking it with TRAPEZIUMX-V.
Perform the Opening/Closing of
Grips from a Single Controller
Using a hand-held controller, both pneumatic and hydraulic type grips can be opened and closed automatically. This controller improves productivity since everything needed to prepare for measurements, from crosshead movement and testing conditions settings to hydraulic adjustments, can generally be implemented.
Check Detailed Settings with
a Hand-Held Controller
Lorem
Lorem
Applications
Options & accessories
- Compression Adapter, 20 kN
- Tensile Compression Adapter, 20 kN
- 5 kN Max. Load Cell Adapter, 20 kN
- 10 kN Load Cell Adapter, 20 kN
- Universal Adapter, 20 kN
- Compression Adapter, 50 kN
- Tensile Compression Adapter, 50 kN
- 5 kN Max. Load Cell Adapter, 50 kN
- 10 kN Load Cell Adapter, 50 kN
- Universal Adapter, 50 kN
- Compression Adapter, 100 kN
- Tensile Compression Adapter, 100 kN
- 5 kN Max. Load Cell Adapter, 100 kN
- 10 kN Load Cell Adapter, 100 kN
- Universal Adapter, 100 kN
- Compression Adapter, 300 kN
- Tensile Compression Adapter, 300 kN
- 5 kN Max. Load Cell Adapter, 300 kN
- 10 kN Load Cell Adapter, 300 kN
- Universal Adapter, 300 kN
Lorem
Lorem
Lorem
Lorem
Lorem
Lorem
Lorem
Lorem
Technical data: 100 kN, 50 kN, 20/50kN
 |  |  | |
| AGX-100kNV2 | AGX-50kNV2D | AGX-20/50kNV2 | |
|---|---|---|---|
| Max. Loading Capacity | 10 kN | 10 kN | 10 kN |
| Loading Method | AC servomotor drive | AC servomotor drive | AC servomotor drive |
| Test force Measuring Range*1 | |||
| High-Accuracy Type | Within ±0.5 % error of the indicated test force (in a range from 1/1000 to 1/100 of the load cell rated capacity) Within ±0.3 % error of the indicated test force (in a range from 1/100 to 1/1 of the load cell rated capacity) Compatible with JIS B7721 Class 0.5, EN 10002-2 Grade 0.5, ISO 7500-1 Class 0.5, BS 1610 Class 0.5, DIN 51221 Class 0.5, and ASTM E4 | ||
| Wide Ranging Type | Within ±1 % error of the indicated test force (in a range from 1/2000 to 1/1000 of the load cell rated capacity) Within ±0.5 % error of the indicated test force (in a range from 1/1000 to 1/100 of the load cell rated capacity) Within ±0.3 % error of the indicated test force (in a range from 1/100 to 1/1 of the load cell rated capacity) Compatible with JIS B7721 Class 1, EN 10002-2 Grade 1, ISO 7500-1 Class 1, BS 1610 Class 1, DIN 51221 Class 1, and ASTM E4 | ||
| Standard-Accuracy Type | Within ±1 % error of the indicated test force (in a range from 1/1000 to 1/1 of the load cell rated capacity) Compatible with JIS B7721 Class 1, EN 10002-2 Grade 1, ISO 7500-1 Class 1, BS 1610 Class 1, DIN 51221 Class 1, and ASTM E4 | ||
Within ±1 % error of the indicated test force (in a range from 1/500 to 1/1 of the load cell rated capacity) Compatible with JIS B7721 Class 1, EN 10002-2 Grade 1, ISO 7500-1 Class 1, BS 1610 Class 1, DIN 51221 Class 1, and ASTM E4 | |||
| Crosshead | |||
| Crosshead Speed Range*2 | 0.0005~3000 mm/min | 0.0005~1500 mm/min | 0.00005~1500 mm/min |
| Maximum Crosshead Return Speed | 3000 mm/min | 2000 mm/min | 2000 mm/min |
| Crosshead Speed Accuracy | ±0.1 % | ±0.1 % | ±0.1 % |
| Crosshead Speed and Permitted Test Force | Up to the maximum load capacity for all speed ranges | ||
| Crosshead Position Detection | |||
| Measurement System | Battery-less multi-turn absolute encoder | ||
| Positional Accuracy | Within ±0.05 % of the indicated value, but ±0.01 mm when the indicated value is below 20 mm | ||
| Crosshead-Table Clearance (mm) (Tensile Stroke)*3 | |||
| Standard Height | 180 to 1150 (0 to 550) | 200 to 1150 (20 kN:0 to 750 mm, 50 kN:0 to 690 mm) | 215 to 1265 (20 kN:0 to 860 mm, 50 kN:0 to 800 mm) |
| +250 mm Extension | 180 to 1375 (0 to 775 mm) | 200 to 1375 (20 kN:0 to 975 mm, 50 kN:0 to 915 mm) | 215 to 1490 (20 kN:0 to 1085 mm, 50 kN:0 to 1025 mm) |
| +500 mm Extension | 180 to 1600 (0 to 1000 mm) | 200 to 1600 (20 kN:0 to 1200 mm, 50 kN:0 to 1140 mm) | 215 to 1715 (20 kN:0 to 1310 mm, 50 kN:0 to 1250 mm) |
| +750 mm Extension | — | — | 215 to 1940 (20 kN:0 to 1535 mm, 50 kN:0 to 1475 mm) |
| Effective Test Width | 420 mm | 500 mm | 600 mm |
| Data Capture Rate | 10 kHz max. | 10 kHz max. | 10 kHz max. |
| Frame Rigidity | |||
| Direction of Tension | 60 kN/mm | 180 kN/mm | 180 kN/mm |
| Direction of Compression | 60 kN/mm | 180 kN/mm | 180 kN/mm |
| Standard Functions | |||
| Optional Functions |
| ||
| Standard Accessories | Load cell, CAL cable, Tool set, Power supply cable, Rotating rod, Hexagon wrench, Instruction manual, Safety caution sheet (1 each) | ||
| Model Lineup by Load Cell Capacity*5 | 10 N/20 N/50 N/100 N/500 N/1 kN/5 kN/10 kN | 20 kN/50 kN | 20 kN/50 kN |
| Dimensions*6 | |||
| Standard Height | W 798 × D 515 × H 1582 mm | W 975 × D 579 × H 1708 mm | W 1206 × D 765 × H 2170 mm |
| +250 mm Extension | W 798 × D 515 × H 1832 mm | W 975 × D 579 × H 1958 mm | W 1206 × D 765 × H 2420 mm |
| +500 mm Extension | W 798 × D 515 × H 2082 mm | W 975 × D 579 × H 2208 mm | W 1206 × D 765 × H 2670 mm |
| Weight | |||
| Standard Height | |||
| 100 V Model | 210 kg | — | — |
| 200 V Model | 210 kg | 410 kg | 660 kg |
| 400 V Model | — | — | 670 kg |
| +250 Extension | |||
| 100 V Model | 210 kg | — | — |
| 200 V Model | 220 kg | 420 kg | 670 kg |
| 400 V Model | — | — | 680 kg |
| +500 Extension | |||
| 100 V Model | 240 kg | — | — |
| 200 V Model | 230 kg | 440 kg | 690 kg |
| 400 V Model | — | — | 700 kg |
| +750 Extension | |||
| 100 V Model | — | — | — |
| 200 V Model | — | — | 700 kg |
| 400 V Model | — | — | 710 kg |
| Power Supply/ Breaker Capacity Required | |||
100 V Model (Single-Phase, 100 to 115 V) | 1.5 kVA/15 A | — | — |
200 V Model (Single-Phase, 200 to 230 V) | 2.0 kVA/10 A | 5.5 kVA/30 A | — |
200 V Model (3-Phase, 200 to 230 V)Required | 2.0 kVA/10 A | — | 4.5 kVA/15 A |
400 V Model (3-Phase, 380 to 400 V) | — | — | 4.0 kVA/10 A |
Technical data: 100 kN, 300 kN, 600kN
 |  |  | |
| AGX-100kNV2 | AGX-300kNV2 | AGX-600kNV2 | |
|---|---|---|---|
| Max. Loading Capacity | 100 kN | 300 kN | 600 kN |
| Loading Method | AC servomotor drive | AC servomotor drive | AC servomotor drive |
| Test force Measuring Range*1 | |||
| High-Accuracy Type | Within ±0.5% error of the indicated test force Within ±0.3 % error of the indicated test force Compatible with JIS Compatible with JIS B7721 Class 0.5, | Within ±0.5 error % of the indicated test force (in a range from 1/500 to 1/1 of the load cell rated capacity) Compatible with JIS B7721 Class 0.5, EN 10002-2 Grade 0.5, ISO 7500-1 Class 0.5, BS 1610 Class 0.5, DIN 51221 Class 0.5, and ASTM E4 | |
| Wide Ranging Type | Within ±1 % error of the indicated test force Within ±0.5 % error of the indicated test force Within ±0.3 % error of the indicated test force Compatible with JIS B7721 Class 1, EN 10002-2 Grade 1, | — | |
| Standard-Accuracy Type | Within ±1 % error of the indicated test force (in a range from 1/1000 to 1/1 of the load cell rated capacity) Compatible with JIS B7721 Class 1, EN 10002-2 Grade 1,ISO 7500-1 Class 1, BS 1610 Class 1, DIN 51221 Class 1, and ASTM E4 | Within ±1 % error of the indicated test force Compatible with JIS B7721 Class 1, EN 10002-2 Grade 1,ISO 7500-1 Class 1, BS 1610 Class 1, DIN 51221 Class 1, and ASTM E4 | |
Within ±1 % error of the indicated test force (in a range from 1/500 to 1/1 of the load cell rated capacity) Compatible with JIS B7721 Class 1, EN 10002-2 Grade 1, ISO 7500-1 Class 1, BS 1610 Class 1, DIN 51221 Class 1, and ASTM E4 | |||
| Crosshead | |||
| Crosshead Speed Range*2 | 0.00005 to 1500 mm/min | 0.00005 to 720 mm/min | 0.00005 to 540 mm/min |
| Maximum Crosshead Return Speed | 1800 mm/min | 720 mm/min | 540 mm/min |
| Crosshead Speed Accuracy | ±0.1 % | ±0.1 % | ±0.1 % |
| Crosshead Speed and Permitted Test Force | Up to the maximum load capacity for all speed ranges | ||
| Crosshead Position Detection | |||
| Measurement System | Battery-less multi-turn absolute encoder | ||
| Positional Accuracy | Within ±0.05 % of the indicated value, but ±0.01 mm when the indicated value is below 20 mm | ||
| Crosshead-Table Clearance (mm) (Tensile Stroke)*3 | |||
| Standard Height | 215 to 1250 (0 to 760) | 215 to 1440 (0 to 630) | 215 to 1650 (0 to 850) |
| +250 mm Extension | 215 to 1475 (0 to 985) | 215 to 1665 (0 to 855) | 215 to 1875 (0 to 1075) |
| +500 mm Extension | 215 to 1700 (0 to 1210) | 215 to 1890 (0 to 1080) | 215 to 2100 (0 to 1300) |
| +750 mm Extension | 215 to 1925 (0 to 1435) | 215 to 2115 (0 to 1305) | 215 to 2325 （0 to 1525) |
| Effective Test Width | 600 mm | 600 mm | 790 mm |
| Data Capture Rate | 110 kHz max. | 10 kHz max. | 10 kHz max. |
| Frame Rigidity | |||
| Direction of Tension | 300 kN/mm | 400 kN/mm | 700 kN/mm |
| Direction of Compression | 300 kN/mm | 400 kN/mm | 600 kN/mm |
| Standard Functions | |||
| Optional Functions |
| ||
| Standard Accessories | Load cell, CAL cable, Tool set, Power supply cable, Rotating rod, Hexagon wrench, Instruction manual, Safety caution sheet (1 each) | ||
| Model Lineup by Load Cell Capacity | 100 kN | 300 kN | 600 kN |
| Dimensions*6 | |||
| Standard Height | W 1206 × D 765 × H 2170 mm | W 1206 × D 765 × H 2420 mm | W 1605 × D 1122 × H 2840 mm |
| +250 mm Extension | W 1206 × D 765 × H 2420 mm | W 1206 × D 765 × H 2670 mm | W 1605 × D 1122 × H 3090 mm |
| +500 mm Extension | W 1206 × D 765 × H 2670 mm | W 1206 × D 765 × H 2920 mm | W 1605 × D 1122 × H 3340 mm |
| +750 mm Extension | W 1206 × D 765 × H 2920 mm | W 1206 × D 765 × H 3170 mm | W 1605 × D 1122 × H 3590 mm |
| Weight | |||
| Standard Height | |||
| 100 V Model | — | — | — |
| 200 V Model | 820 kg | 1000 kg | 2930 kg |
| 400 V Model | 830 kg | 1010 kg | — |
| +250 Extension | |||
| 100 V Model | — | — | — |
| 200 V Model | 850 kg | 1030 kg | 2990 kg |
| 400 V Model | 850 kg | 1040 kg | — |
| +500 Extension | |||
| 100 V Model | — | — | — |
| 200 V Model | 870 kg | 1050 kg | 3040 kg |
| 400 V Model | 880 kg | 1060 kg | — |
| +750 Extension | |||
| 100 V Model | — | — | — |
| 200 V Model | 890 kg | 1080 kg | 3100 kg |
| 400 V Model | 900 kg | 1090 kg | — |
| Power Supply/ Breaker Capacity Required | |||
100 V Model (Single-Phase, 100 to 115 V) | — | — | — |
200 V Model (Single-Phase, 200 to 230 V) | — | — | — |
200 V Model (3-Phase, 200 to 230 V)Required | 6.5 kVA/20 A | 7.5 kVA/30 A | 13.0 kVA/40 A |
400 V Model (3-Phase, 380 to 400 V) | 5.0 kVA/10 A | 6.5 kVA/15 A | — |
English 
German 
Czech 
Slovak 
Bulgarian 
Romanian 